MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE

AK12015
Rating 

20g.

General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.

 

– 99% Cyano.

– Ethyl cyanoacrylate

– Use temperature: -55º to 120º

– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.

– Definitive cure time: 24 h

– Viscosity: 110 mPa.S

– Shear strength: 21.0 MPa

 

* Bottles are not filled at a 100% to leave some air and make it work properly.

£6.90
Quantity
Available

Product Details
AK12015
7 Items
Reviews

No customer reviews for the moment.

Write your review

MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE

MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE

20g.

General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.

 

– 99% Cyano.

– Ethyl cyanoacrylate

– Use temperature: -55º to 120º

– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.

– Definitive cure time: 24 h

– Viscosity: 110 mPa.S

– Shear strength: 21.0 MPa

 

* Bottles are not filled at a 100% to leave some air and make it work properly.

Write your review
16 other products in the same category:

Reference: AK11008

Brand: AK Interactive

GRIMY GREY – STANDARD

Review(s): 0

The basic label. The orange dot is the element that remarks a range of colors designed for any kind of modeler. The clear and easily identifiable label includes the name of the color and its reference code at the top.   It comes in 17ml bottles.

Price £2.20
More
Available

Reference: UV Resin 100ml

UV Resin Crystal Clear Hard 100g

Review(s): 0

Better transparency, lower viscosity, and most importantly, much faster curing. HIGHER QUALITY: Undoubtedly excellent transparency, 100% crystal clear and non-yellowing, with hard glassy finish and uniform gloss. Less shrinking, less bubbles, lower viscosity. EASIER: No preparation is required for the resin. Specially designed nozzle make it easy to...

Price £15.00
More
Available

Reference: AK2041

Brand: AK Interactive

BURNT JET ENGINE PIGMENT

Review(s): 0

Ultrafine high quality pigment for modelling.   The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower...

Price £3.30
More
Available

Follow us on Facebook