GLOSSY LUCKY VARNISH (17 mL)

AMIG2057
Rating 

Acrylic professional varnish. 17mL jar.

£2.55
Quantity
Available

Description

Varnish application has long been one of the biggest challenges for modelers. Many have ruined a few models due to the use of poor quality or inappropriate varnishes for the job at hand, and the thing is that the varnishing process is an extremely important step of the build. For the first time, AMMO releases a complete varnish range for winning results on each and every model.

These acrylic varnishes will allow you to get the best results with both brush and airbrush in a very simple manner. It must be used in thin layers, and can be applied directly from the jar without thinning for a perfect finish. When used through the airbrush, we recommend spraying 6 inches (15 cm) away from the surface. It is non-toxic and odorless, and dries completely in 24 hours.

This new varnish range was carefully developed over a lengthy period to ensure the modeler a perfect result every time. Don´t take your chances, use LUCKY VARNISH, a winning product that will rule out any mishap that may occur when using ordinary varnishes. Available in all the usual finishes used in scale modeling, from high gloss to dead flat.

Product Details
AMIG2057
5 Items
Reviews

No customer reviews for the moment.

Write your review

GLOSSY LUCKY VARNISH (17 mL)

GLOSSY LUCKY VARNISH (17 mL)

Acrylic professional varnish. 17mL jar.

Write your review
16 other products in the same category:

Reference: F401

Brand: Mig productions

OCHRE FOR LIGHT SAND

Review(s): 0

Use over brown, yellow and sand colors. With this filter you be able to change subtle base coats. *New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect. FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to...

Price £2.95
More
Available

Reference: MP1012

Brand: Mig productions

0/0 ROUND BRUSH. MARTA KOLINSKY

Review(s): 0

Brush of hair of tail of Marta Kolinsky. Handmade with a very sharp, durable tip for the most precise work. It has a perfect balance between elasticity and ability to load paint. Essential for exigent figure modellers. Perfect value for money. Your daily quality brush will be those of Mig Productions from the moment you try them.

Price £4.10
More
Available

Reference: AMIG2027

Brand: Ammo By Mig Jimenez

ONE SHOT PRIMER - SAND FLESH

Review(s): 0

The definitive primer solution that covers in one layer in sand flesh color. Formulated for every kind of surface, water-soluble, with high gripping power resin, photo-etch. Jar of 60 mL. High gripping power. Fast dry, sandable within 24 hours. Self-leveling formula preserves all fine details. Ready for direct use, no thinner or dilution needed. No drip...

Price £4.30
More
Available

Reference: 8436574504620ES

Brand: Green Stuff World

Paint Remover 240 ml

Review(s): 0

Paint Remover 240 ml GSW Paint Remover, capable of removing acrylic, enamel, and lacquer-based paints. Completely safe for miniatures in plastic, resin, or metal. Can be reused several times and has low evaporation. Very low smell. Partially submerge miniature in the paint stripper/paint killer for 1 to 6 hours depending on the paint type, rinse with...

Price £8.60
More
Out-of-Stock

Reference: AK11045

Brand: AK Interactive

DEEP YELLOW – INTENSE

Review(s): 0

Intense colors are identified with the yellow circle on the label. These tones contain pigments of high purity and high concentration for the most vivid colors. It comes in 17ml bottles.

Price £2.20
More
Available

Reference: MM TS-025

Brand: Meng Model

1/35 ISRAEL MAIN BATTLE TANK MERKAVA MK.3D LATE

Review(s): 0

The Merkava Mk.3D tanks are in large service in the IDF, both in regular brigades and reserved ones.  It's equipped with a 120mm smooth bore gun and advanced fire control system called BAZ (glaring lightning). A 1200hp air-cooled engine, a new transmission and new heavy duty final drives are located in the front of the hull. The Merkava Mk.3D suspension...

Price £53.60
More
Out-of-Stock

Reference: TAKO2054

Brand: Takom

1/35 Iraqi Medium Tank Type-69 II 2 in 1

Review(s): 0

This kit of the Iraqi Medium Tank Type-69 II includes individual tracks, decals for 6 marking variations, and photo-etch and clear parts.  A detailed metal tow cable, external fuel lines, and rubber gun mantlet dust cover are all included too. All hatches can be built in open or closed position, and all road wheels can be built in damaged condition....

Price £34.00
More
Available

Reference: P300

Brand: Mig productions

ACUMULATED EARTH EFFECT (75ML)

Review(s): 0

This effect is special to imitate the accumulation of earth in vehicles EFFECTS: Apply the product by using a medium sized round soft paintbrush. Deposit onto your scale model around details, seams and in holes creating acumulated earth effects. Let the product dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes....

Price £5.25
More
Available

Follow us on Facebook